Compared to Anycubic Wash & Cure 2.0, the cleaning basket capacity of Anycubic Wash & Cure 3 has now reached 3 liters, an impressive increase of 100%. The total volume of the cleaning bucket has been increased to 4 liters. This makes it perfectly adapted for LCD (light-cured) 3D printers of size 7.3 inches or smaller. The curing size was increased by 15% to 160*180 millimeters to accommodate larger and more models for a single post-processing session.
Localized Strengthening, Uniform Curing
The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² in the irradiation range of 1-3 cm, significantly strengthening the curing effect in thin areas such as the top of models and the hem of clothes.
Adopting a brand new light beads and lens light source arrangement, the curing integrity of Anycubic Wash & Cure 3 is increased by 20% compared to the previous 2.0. This results in a more comprehensive and comprehensive improvement of the entire model.
Double Layer Design, IPA Saving
The double-layer PP material cleaning basket is designed to support simultaneous cleaning with the platform. It has two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA use.
Simple to Use, Quiet and Efficient
Dual-mode cleaning and curing easily selectable with one click; Advanced Gooseneck light curing mode can be easily turned on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes as desired.
Thanks to a more isolated structural design and software optimization, noise interference during cleaning and curing is reduced [1], creating a quieter and more comfortable working environment.
[1] Maximum sound measured by Anycubic Laboratory in machine operating condition as < 65dB.
Anycubic Washing and Curing 3 Model Screen
Anycubic Washing and Curing 3 Technical Specifications
22728
Anycubic Wash and Cure 3 Washing and Curing Device