Object Avoidance Robot - Four Eyes (Disassembled)

The robot that escapes from the obstacle is a robot type which can prevent the movement of the autonomous environment control robot. It requires various sensors such as ultrasonic and infrared to ensure environmental control.

You will be able to detect obstacles with the code you have written in the Object Avoidance Robot and avoid the obstacle or approach the obstacle.

There is reverse voltage protection on the card. Therefore, your circuit boards will not be damaged if you accidentally reverse your project.

Rokart board has built-in motor drive integrated, buzzer, 3-Dip Switch and 3 LEDs.

This product is shipped without installation. If you want the model to be assembled, you can review the product in the link.

Note: There is no battery in the set.

Package Included:

• 1 x Arduino Nano Clone - with USB Cable - (USB Chip CH340)
  
• 1 x HC-SR04 Ultrasonic Distance Sensor
  
• 2 x 6 V 250 RPM Motor and Wheel Set
  
• 1 x 9V Battery Heading
  
• 1 x HC-SR04 Ultrasonic Distance Sensor Holder
  
• 1 x Mini Drunk Wheel
  
• 1 x Car Chassis
  
• 4 x M3 15mm Metal Female-Male Spacer(Standoff)
• 1 x Rokart Basic Robotic Card
  
• 1 x 4 Female-Male Jumper Cable
  
• 6 x Plastic Clamp
  
• 4 x 2 Color Cable