Bearing-Ball Air Blower Fan 4010 12V (Compatible with CR10 Series)

Bearing-Ball Air Blower Fan 4010 12V (Compatible with CR10 Series)

Bearing-Ball Air Blower Fan is used to cool the hot air formed in the environment and to spread the cold air to more regions. In 3D printers, it is used to cool the extruder, hotend and nozzle. Despite having a small size, it has a remarkable flow rate. It is permanently electrically protected against reverse polarity, interference and overload. It is highly resistant to vibration thanks to its low rotor weight and precise balancing. It is a fairly long-lasting fan due to its low power consumption.

Bearing-Ball Air Blower Fan Technical Specifications:

• Working Voltage: 12V
• Current Consumption: 80/130mA
• Air Flow: 2.6 CFM
• Working Life: 40,000 Hours
• Cable Length: 15 cm with XH2.54-2 PIN Connector
• Bearing Type: Hydraulic
• Cooling Material: Copper and Aluminum
• Maximum Air Flow: CMM: 0.361 / CFM: 12.75
• Maximum Air Pressure: 11.66
• Speed ​​: 9500 Rpm
• Noise / Noise : 40.2 dB(A)
• Input Voltage: 12V
• Current: 0.20A
• Power: 2.4W
• Rated voltage: DC12V
• Interface: 2-Wire
• Size: 40 x 40 x 15mm
• Creality CR-10 Serisi ile Uyumludur.