Deneyap Mini
With its wireless communication (Wi-Fi) infrastructure, Deneyapap Mini is the smallest member of the Deneyapation card that you will start coding with.
- Experiap Mini was developed using the original ESP32-S2 integrated microprocessor.
- By using the Wi-Fi communication feature, you can exchange data between your system and your cloud-based application. You can set up a closed-loop wireless communication network by using Deneyapap Mini as a server.
- It has a rich connection interface such as USB OTG, SPI, UART, I2S, I2C, Capacitive Sensing. Also, in order to provide you flexibility, some of these connection interfaces can be used from any pin you want according to your needs.
- By using the I2C communication connector, you can quickly implement your system consisting of sensor and actuator units without cable connection and soldering.
- In addition, there are 2 buttons and 1 5050 RGB LED internally.
- It has 22 pins that can be used for general purposes.
- Deneyap Card has a design that is compatible with the breadboard. Its pins are soldered for you to start developing immediately.
- Deneyap Card is compatible with Arduino IDE. You can start coding using the guidelines..
Deneyap Mini Technical Specifications:
- Single Core 240MHz Tensilica Xtensa LX7 Microprocessor
- 4MB SPI Flash
- 320KB SRAM
- 128KB ROM
- 2.4GHz Wi-Fi – 802.11b/g/n
- Internal PCB Antenna
- 5050 RGB LED (Pins, LEDR, LEDG, LEDB)
- General Purpose Button (Pin: GPKEY)
- USB Micro-B
- I2C Communication Connector
- 22 x Digital Input/Output Pins
- 10 x Analog Input Pins (13-bit ADC)
- All Digital Input/Output Pins; Supports UART, SPI, I2C Communication Interfaces and
- External Interrupt
- All Digital Output Pins Support PWM
- 3.3V Operating Voltage
- 3.3V and 5V Output Voltage
- 3.3 – 5.5V Input Voltage
- 50.00mm x 20.32mm x 12.96mm
Useful Links:
EN
